<tbody id="ga8qg"></tbody>

Magnetic Levitation Centrifugal Compressor

The magnetic suspension centrifugal compressor adopts 5-degree-of-freedom magnetic suspension bearing and high-speed permanent magnet synchronous motor technology, eliminating the complex speed-increasing gearbox and lubricating oil system required by traditional compressors, and is 100% oil-free. During operation, the rotor is completely suspended, with no mechanical friction, no transmission loss, low noise, small vibration, long service life, no performance degradation, and 20% energy saving compared to traditional air compressors. The dedicated magnetic suspension controller can monitor the rotor operation status in real time, accurately control the axis position, and ensure the stability of machine operation.

Power:110-370kWPressure:0.15-0.4MPa

Get Product Quotation

Download Product Information

Features Core Technology Machine structure IOT Technology

Features

High efficiency Energy saving

Compared with the traditional air compressor, the energy saving is 10%-20%; Compared with the piston machine, the energy saving is 20-30%.

Simple operation intelligent control

Intelligent and humanized touch screen, real-time monitoring compressor bearing temperature, axis trajectory and other parameters connected with the user main control machine, to achieve phased control.

Low noise No vibration

Noise below 80 dB, no vibration, no foundation or anchor bolts.

No lubrication and maintenance free

100% oil-free magnetic levitation bearing system, avoid secondary pollution, no need for regular maintenance and replacement of bearings.

Highly integrated and easy to install

The machine is highly integrated, small in size, light in weight and easy to install.

Long life semi-permanent

Magnetic levitation bearing technology, more than 20 years of semi-permanent design, life cycle efficiency does not decay.

Core Technology

Three-dimensional impeller

The high-order modal calculation obtains the optimal solution of the full arc of the full arc of the impeller, avoiding turbulence and reducing over speed blocking;Precision manufacturing of aviation aluminum, strong corrosion resistance;Precision manufactured by 5-axis machining center, the tolerance is kept below 5/1000mm.

High speed permanent magnet motor

Using high-efficiency permanent magnet synchronous motor (PMSM), the efficiency is 96%; the impeller is directly connected to the shaft, and the power transmission efficiency can reach 100%; the aerodynamic engineering technology, the speed can reach more than 100,000 rpm; the insulation grade is H class (Maximum temperature resistance 180°C);

Magnetic bearing

Five degrees of freedom magnetic levitation bearing with 8 sensors; The sensor signal processing frequency is 10000 times per second, and the rotor axis position is accurately controlled. FE optimizes magnetic force design and minimizes overflow; High load capacity of up to 10kN radial and 20kN thrust; Rotor unbalance compensation and dynamic support stiffness; No contact, no wear and no lubrication;

The sensor

Reliable sensor technology to ensure the whole magnetic levitation bearing system stable operation; Induced current or full current; One sensor unit (3 displacement,1 rotation) standby pulse sensor has four sensing channels; Low noise and high resolution design, integrated protection shielding external magnetic field;

Machine structure

Magnetic suspension bearing controller

-all-digital controller;

-Superior damping function;

- Multi-function monitoring capability;

-Efficient service interface.

Permanent magnet high-speed host

-PMSM permanent magnet synchronous motor with high speed rotation optimization design, efficiency can reach more than 96%, through the frequency converter can be accurate speed control;

-Precision machining ternary flow impeller;

five degrees of freedom magnetic levitation bearing;

-Liquid cooling + air cooling.

High efficiency frequency converter

-Use well-known brand inverter, high stability and reliability;

-Provide a miniaturization algorithm for high-speed rotations;

-Achieve high speed rotation function by adjusting frequency (HZ) to save energy.

Intelligent operation panel

-Touch screen real-time monitoring equipment operation;

-Intelligent remote control;

-Automatic fault alarm, easy to analyze the cause of the failure.

Radiator

-High heat transfer efficiency

-Due to the perturbation of the fins to the fluid, the boundary layer is constantly broken, so the heat transfer coefficient is large. At the same time, because the partition and fin are very thin, it has high thermal conductivity.

-Smaller volume, larger heat dissipation area lightweight design, heat exchanger expansion surface area up to 1000m2/m3.

IOT Technology

The cloud platform can record and provide the operating status and operating parameters of the wind turbines bound to the platform, as well as perform fault alarm and data recording analysis. Users can log in to the platform to realize remote monitoring and energy-saving settings management, enabling users to realize real-time equipment management. At present, the IoT cloud platform provides ANDRIOD, IOS, and PC clients, and open interfaces to link with third-party software such as ERP, providing users with more possibilities.

Statistical analysis of gas data to help enterprises make business decisionsStable air pressure, scientific energy saving of the wholeUse gas on demand to avoid wasting energyEquipment operation daily records, maintenance and daily management are more convenientReal-time monitoring of energy consumption, real-time data collectionVisualize equipment running status and view real-time working statusEquipment remote management, intelligent joint control